Specifications: Tractor Engine (HP): 25-45 Tractor Hitch: CAT 1 Working Width (in): 72 Capacity (cu. Ft): 18.9 Approximate Weight (lbs): 551 Scarifier Depth (in): 0, 1.5, 3 No. of Scarifiers: 6 Tailgate Type: Fixed Cutting Edges: 2 Scarifier Mount: Heavy-Duty saddle

Features • Swivel top link• Category 1; 3PT hitch• PTO shaft shear pin protected• Heavy duty oil filled gearbox• Shorter boom for easier lifting with sub 30 HP tractor• Guide handle (not pictured)• Parking stand (not pictured) Specifications Drilling Depth: 40″ HP Rating: Up to 30 HP Weight: 135 lbs

Feature • Cat 1, 3 point hitch• 3 PT mount• Reinforced moldboard• 5 reversible positions• For tractors up to 60HP• Adjustable tilt blades Specifications HP Rating: 35 – 60 HP Mount: 3 point No. of Shanks: 7 Weight: 780 lbs Width: 96″

Features • Cat 1 & 2; 3 point hitch• 540 RPM PTO• Side belt drive• Fixed center hitch• Adjustable skid shoes Specifications Flails Required: 64 Hammers Required: 32 HP Rating: 55 – 70 HP Offset: 33″_|____45″ Overall Width: 84.5″ Weight: 948 lbs Working Width: 78″

Features • Cat 1 & 2; 3 point hitch• 540 RPM PTO• Side belt drive• Fixed center hitch• Adjustable skid shoes Specifications Flails Required: 56 Hammers Required: 28 HP Rating: 40 – 50 HP Offset: 28″_|____40″ Overall Width: 74.5 Weight: 864 lbs Working Width: 68″

Features • Cat 1 & 2; 3 point hitch• 540 RPM PTO• Side belt drive• Fixed center hitch• Adjustable skid shoes Specifications Flails Required: 48 Hammers Required: 24 HP Rating: 30 – 40 HP Offset: 24″_|____36″ Overall Width: 66.5″ Weight: 754 lbs Working Width: 60″

• Cat 1 & 2; 3 point hitch• 540 RPM PTO• Side belt drive• Fixed center hitch• Adjustable skid shoes Specifications Flails Required: 40 Hammers Required: 20 HP Rating: 18 – 25 HP Offset: 17″_|____31″ Overall Width: 54″ Weight: 611 lbs Working Width: 48″

Lightweight: Assembled at the factory for fast installation and use. Powerful: Sturdy yet lightweight allowing to lift heavier loads.* Security: Strategic design and size of cylinders helps reduce the risk of damage to the hydraulics. Weight: 235 lbs. Working width: 54″ Closed height: 29 3/8″ Jaw opening: 30″ Number of teeth: 6 bottom & 5 … Read more

Quickly dig, rake, pile and load brush. Designed light but tough for compact tractors. EVERY TINE IS MADE FROM ONE PIECE OF STEEL FOR MAXIMUM RIGIDITY NITROSTEEL® CYLINDER RODS & TEFLON® COATED BUSHINGS ON ALL PIVOTS Overall Width (Inches): 56.5 Height: Overall / Bucket (Inches): 27.9 / 24.9 Overall Depth (Inches): 16.6 Number of Bottom … Read more